Raspberry pi i2c fritzing7/27/2023 ![]() LLC is required if Arduino is operating at 5V and master at 3.3V. AVR_Miner_RPI.py or py AVR_Miner_RPI.py in the command prompt) VersionĭuinoCoinI2C_RPI Version 3.3 Arduino - SlaveĪrduino shall use DuinoCoin_RPI_Tiny_Slave sketch. In command prompt type py -m pip install -r requirements.txt to install required pip dependenciesįinally, connect your I2C AVR miner and launch the software (e.g.Extract the zip archive you've downloaded and open the folder in command prompt.Download and install Python 3 (add Python and Pip to Windows PATH).Change to 400000 if you prefer 400kHz SCL.įinally, connect your I2C AVR miner and launch the software (e.g. again, sudo nano /boot/config.txt,Īdd dtparam=i2c_baudrate=1000000 and dtparam=i2c_vc_baudrate=1000000 for 1MHz. Refer detailed steps at raspberry-pi-i2cįor RPI I2C Bus 0, extra step is needed, sudo nano /boot/config.txt and add dtparam=i2c_vc=on, save and rebootįor RPi Pico as worker, the RPi master is strongly recomended to use 400kHz/1MHz SCL clock frequency. ![]() Python3 -m pip install -r requirements.txt # Install pip dependencies Git clone # Clone DuinoCoinI2C_RPI repository cd DuinoCoinI2C_RPI Sudo apt install python3 python3-pip git i2c-tools python3-smbus screen -y # Install dependencies
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |